background image

 

 

VPN CONFIGURATION GUIDE

 

PREMIUM BUSINESS GATEWAY - DEVG2020

 

VERSION 2.03 

NEED MORE SUPPORT? 

If you have questions beyond this guide, we want to help.  

To learn more about your Business Broadband or DOT tools and features, visit the Business Broadband support 
page at 

http://www.telstra.com.au/business-enterprise/help-support/software-downloads/index.htm

 or if 

you are a DOT customer, visit DOT Online Support page at 

http://www.telstra.com/dot/support

 

To speak with a DOT consultant, or set up a DOT 

training session, phone us on 13 2000 and say “Digital Office 

Technology

” when prompted. Our consultants are available 24 hours a day.  

When calling, please have your Account Number or phone number, including area code, ready for the consultant. 

CONVENTIONS USED IN THIS GUIDE 

The following typographical conventions are used in this guide for simplicity and readability: 

Web addresses, e-mail addresses and hyperlinks are shown in 

bold italics

, for example 

www.telstraenterprise.com.au

 

 

 

 

 

© Telstra Corporation Limited (ABN 33 051 775 556) 2013.  All rights reserved.  

This work is copyright. Apart from any use as permitted under the Copyright Act 1968, i nformation contained within this manual 
cannot be used for any other purpose other than the purpose for which it was released. No part of this publication may be 
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, 
recording or otherwise, without the written permission of Telstra Corporation Limited.  

Words mentioned in this bo

ok

 that are known to be trademarks, whether registered or unregistered, have been capitalised or 

use initial capitals. Terms identified as trademarks include Cisco®, Microsoft®, Microsoft  PC®, Apple®, AirPort®, Mac®, 
Linksys®. 

Summary of Contents for DEVG2020 DOT


























Reviews: