Chapter 1: CWGE111 Initial Setup
|
5
CWGE111 802.11g WiFi Receiver User Manual
About the CWGE111 802.11g WiFi Receiver
Congratulations on purchasing your NETGEAR CWGE111 802.11g WiFi Receiver.
Hardware Setup
Figure 1-1 CWGE111 WiFi Receiver
To connect your modem
1.
Attach the provided antenna to the antenna connector.
2.
Insert the provided power adapter into the DC socket on the receiver.
3.
Plug the power adaptor into an electric wall socket.
4.
Connect one end of the provided Ethernet cable to the LAN port on the receiver, and the
other end to the Ethernet port on the computer.
LED Descriptions
Figure 1-2 CWGE111 LED Status Indicators
LED
Description
Power - PWR
Green: Power is on.
Off: Power is off.
Status - RDY
Green: Device is booted.
Off: Device is not booted.
Ethernet - ENET
Green: Ethernet is connected.
Blinking: Sending/Receiving data.
Off: Ethernet is not connected.
Signal bars
Green: Associated with an access point.
Back-and-forth: Searching access point.
Blinking: Acquiring IP address.
Off: Not associated with an access point.
The number of lit signal bars depends on the strength of the received signal.
More lit bars indicate a stronger signal.
