Wireless Cable Modem Gateway CG814WG v3 Reference Manual
2-10
Wireless Configuration
v1.0, June 2007
How to Configure WPA
To configure WPA in the gateway:
1. Log in to the gateway at the default LAN address of
http://192.168.0.1
with the default user
name of
admin
and default password of
password
, or using whatever LAN address and
password you have set up.
2. Click Wireless Settings to go to the Wireless Settings screen.
3. Select WPA-PSK, WPA2-PSK, or WPA (Enterprise).
The settings shown on the screen depend on which Security Option you select.
4. For WPA-PSK or WPA2-PSK, enter the Passphrase. Click
Apply
to save your settings.
5. If you are using WPA (Enterprise) then enter the settings for the Radius Server. These settings
are required for communication with the primary Radius server. A secondary Radius server
can be configured, which is used on failure on Primary Radius Server.
•
Primary Radius Server IP Address
: The IP address of the Radius Server. The default is
0.0.0.0
Note:
Not all wireless adapters support WPA. Furthermore, client software is required on
the client. Windows XP and Windows 2000 with Service Pack 3 or above do
include the client software that supports WPA. The wireless adapter hardware and
driver must also support WPA. Consult the product documentation for your
wireless adapter and WPA client software for instructions on configuring WPA
settings.
Figure 2-4
WPA-PSK
WPA2-PSK
WPA (Enterprise)
Summary of Contents for CG814WG V3
Page 4: ...v1 0 June 2007 iv...
Page 10: ...Wireless Cable Modem Gateway CG814WG v3 Reference Manual vi About This Manual v1 0 June 2007...
Page 58: ...Wireless Cable Modem Gateway CG814WG v3 Reference Manual 5 6 Troubleshooting v1 0 June 2007...
Page 64: ...Wireless Cable Modem Gateway CG814WG v3 Reference Manual B 2 Related Documents v1 0 June 2007...
