Maintain and Monitor the Extender
37
AC750
WiF
Range
Extender
3.
When prompted, enter your email address and password.
4.
Click the
Menu
icon
.
The extender menu displays.
5.
Select
Settings > Other Settings
.
6.
Click the
BROWSE
button.
7.
Locate and select the previously saved backup file.
By default, the name of the backup file is
NETGEAR_EX7000.cfg
.
CAUTION:
After you click the
RESTORE
button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
8.
Click the
RESTORE
button.
A confirmation pop-up screen displays.
9.
Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
Return the Extender to Its Factory Default Settings
Under some circumstances (for example, if you lose track of the changes that you made to
the extender settings), you might want to erase the configuration and reset the extender to
factory default settings.
To reset the extender to factory default settings, you can either use the
Factory Reset
button
on the rear panel or log in to the extender and reset it.
For a list of factory default settings, see
Factory Default Settings
on page
46.
