Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
2-2
Installing the 9 dBi Omni-directional Antenna
First, Assemble and Mount the Antenna
Figure 2-1: Antenna Assembly and Mounting
Step
Procedure
Step 1
Feed the antenna cable through the antenna
mounting assembly.
Note
: Use the correct cable.
•
Outdoors
: use the provided 2m antenna
cable.
•
Indoors
: use the provided N/SMA adapter
with a Netgear
cable model
ACC-10314-01, 02, 03, 04 or 05 (sold
separately). For indoors, d
o not use the
provided 2m cable.
Step 2
Securely attach the antenna cable by screwing
it onto the antenna.
Step 3
Insert the antenna into the mounting assembly.
Step 4
Position the key slot on the antenna so that it
is aligned with the mounting screw hole
illustrated in step 5.
Step 5
Tighten the mounting screw so that it fits in the
key slot on the antenna.
Step 6
Attach the assembled antenna to the mounting
surface with the appropriate hardware (U-bolts
for pole mount, L-bracket or no bracket for flat
mount).
Note
: The antenna can be mounted vertically
right-side-up or up-side-down.
#ABLE!SSEMBLY
3TEP
3TEP
3TEP
3TEP
3TEP
3TEP
