Page
12
Web Browser Interface
MAN-REF-CASW
Channel Display Stats
This command displays statistics for a particular channel interface. Prior to selecting this button, pro-
vide the following data on the selection screen:
IFname
the name of the channel interface to display. If not specified, all defined chan-
nel interfaces are displayed.
Device#
limit the display of the channel statistics to a particular device. For an ESCON
channel interface running in “configured” mode, this parameter is the Device
Index. For an ESCON channel interface running in “non-configured” mode, or
for a Bus & Tag channel interface, this parameter is an offset from the UADD
specification. If the UADD parameter is not used, this parameter is an offset
from the low-order byte of the startGNA address.
Example:
specific interface
id txpacks txbytes rxpacks rxbytes
-------- -------- ------------ -------- ------------
2 0 0 0 0
txMiscEr rxMiscEr haltIO streamTo sysReset cmdRej intvReq
-------- -------- -------- -------- -------- -------- --------
0 0 0 0 0 0 0
busOutCk equipCk dataCk overRun delayTx delayRx dataTo
-------- -------- -------- -------- -------- -------- --------
0 0 0 0 0 0 0
where -
id
: id for display only – minor number
txpacks
: # messages sent to the channel
txbytes
: # data bytes sent to the channel
rxpacks
: # messages read from the channel
rxbytes
: # data bytes read from the channel
txMiscEr
: # transmit to the channel errors
rxMiscEr
: # receive from the channel errors
haltIO
: halt I/O count
streamTo
: I/O streaming timeout count
sysReset
: system reset count
cmdRej
: command reject count
intvReq
: intervention required count
busOutCk
: bus out check count
equipCk
: equipment check count
dataCk
: data check count
overRun
: overrun count
delayTx
: # stream delayed messages destined for the channel
delayRx
: # stream delayed messages coming from the channel
dataTo
: data timeout count
