Configuring NP731 in WDS mode
5 of 18
© NetComm Wireless 2017
2.
Configure Repeater devices Network settings
(optional)
Strictly speaking, this configuration is not required. The default network settings on the Repeaters will work, but each
Repeater will be on a different network.
We suggest including all devices on the same LAN network, so that any client connected to the LAN can access both the AP
and all the Repeaters in the WDS.
1
For each repeater, navigate to its
System > Network Interface:
a
Make the following Network settings on each numbered Repeater device:
Item
Setting
Notes
Mode
Static
Use same setting for AP and all Repeaters.
IP Address for
Repeater device 1
192.168.20.253
The AP is set to 192.168.20.254.
IP Address for
Repeater device 2
192.168.20.252
The AP is set to 192.168.20.254.
IP Address for
Repeater device 3
192.168.20.251
The AP is set to 192.168.20.254.
Extra Repeater devices:
Repeater device 4
Repeater device 5
Repeater device 6
Repeater device 7
192.168.20.250
192.168.20.249
192.168.20.248
192.168.20.247
If you add extra devices, use these IP Addresses.
