16 of 18
Technical Support Guide
© NetComm Wireless 2017
Location
Parameter
New Value
General Settings
AP > General
Band
Protocol
Channel Width
Channel
No change, copy to Repeater Device 4
No change, copy to Repeater Device 4
No change, copy to Repeater Device 4
No change, copy to Repeater Device 4
VAP Configuration
AP > VAP Config
ESSID
No change, copy to Repeater Device 4
Security Settings
AP > Security
Pre-shared Key Type
Pre-shared Key
Passphrase
No change, copy to Repeater Device 4
Repeater Settings
AP > Repeater
Repeater Type
No change, copy to Repeater Device 4
WDS Profile
*
1. Select
WDS Link 2
from the drop-down list,
2. Enter the MAC address of
Repeater Device 4
into the
Remote AP MAC Address
field, see
below.
WDS
Enable
Remote AP MAC Address *
Enter the MAC address of
Repeater Device 4
.
Security Type
Cipher Suite
Pre-shared Key Type
Pre-shared Key
No change, copy to Repeater Device 4
No change, copy to Repeater Device 4
No change, copy to Repeater Device 4
No change, copy to Repeater Device 4
*
This will be the second WDS Profile for this dev
ice, WDS Link 1 will continue to be the AP’s MAC address.
2
.
Changes to Configuration of Repeater Device 4
The following parameters in Repeater Device 4 need new values (many can be copied from Repeater Device 3):
Location
Parameter
New Value
Network Settings
System > Network Interface
IP Address
Netmask
Default Gateway
Primary DNS Server
192.168.20.250
255.255.255.0
192.168.20.1
192.168.20.1
Operating Mode
System > Operating Mode
Operating Mode
AP Mode
General Settings
AP > General
Band
Protocol
Channel Width
Channel
Must match the other devices in the WDS.
802.11g+802.111n
Pure 11n
Must match the other devices in the WDS.
Must match the other devices in the WDS.
VAP Configuration
