| W
ireless
M2M
4
NetComm
Wireless
Let’s get started
SIM Card installation
1.
Remove the protective cap labelled SIM/Reset with a flathead screwdriver.
NOTE: If you don’t have a flathead screwdriver or you’re having problems, a small coin will do
the trick.
2.
Place an activated SIM card into SIM card reader with the metallic part of the SIM card facing up.
3.
Push the SIM card in until the spring latches the SIM card in place. You should hear a click. If you
need to remove the SIM card push inward again and the SIM will pop out.
4.
Place the protective cap back on securely to ensure it is protected from water and dust (ensure
IP-67 rating).
