Rev. 1 - YML669
www.netcomm.com.au
NP5430 11g Wireless PC Card User Guide
Page 7
Chapter 3 - Driver Installation for Windows
The following sections cover NetComm Wireless LAN PC Card driver installation in the
Windows Operating Systems.
Note!
You have to install your hardware first before you begin to install the drivers.
Driver installation for Windows 98
Follow the steps below to install the NetComm Wireless LAN PC Card drivers for Windows
98.
1. Insert the NetComm Wireless LAN PC Card into a CardBus slot in the notebook. (Refer to
Chapter 2 - Hardware installation.)
2. After Windows 98 detects the NetComm Wireless LAN PC Card, the Add New Hardware
Wizard window appears. Clicks Next to continue the installation.
3. A screen appears prompting you to select an installation method. Select Search for the best
driver for your device. (Recommended) and click Next to continue.
4. Ensure that the CD-ROM drive is selected. Insert the driver CD-ROM into your CD-ROM
drive and click Next to continue.
5. Click Next to continue the installation.
6. Windows 98 copies files to your hard disk. Click Finish to finish the installation.
7. You will be instructed to restart your computer to complete the installation. Click Yes to
reboot the system. After a system reboot, the Wireless LAN Utility will be installed
automatically. Please go to Chapter 4 to install the utility.
Note!
In most cases, Windows will automatically copy all of the files needed for
networking. If Windows asks you for the files and prompts you to input the path to
the files. Follow the instructions on your screen, and then click OK to continue.
