Rev. 1 - YML669
www.netcomm.com.au
NP5430 11g Wireless PC Card User Guide
Page 11
Using the Wireless LAN PC Card Utility (Windows XP only)
1. Exit the Wireless LAN Utility.
2. Click Windows Wireless Network Configuration icon.
3. Click Advanced… button.
4. Make sure "Use Windows to configure my wireless network settings" is unchecked and click
OK button.
5. Click Start -> All Programs -> Click Start -> All Programs -> "54Mbps WLAN Card
Utility" then click "NetComm NP5430 WLAN utility" to restart the NetComm WLAN PC
Card.
6. The Wireless LAN Utility will appear, Double-click the icon to open the configuration
utility.
7. Click Re-Scan button to start Wireless LAN Utility. (Refer to Configuring the NetComm
Wireless LAN PC Card.)
Using the Wireless LAN Utility In Windows 98, 2000 and ME
Wireless LAN Utility icon
Icon
Meaning
Green:
indicates a connection is linked to a wireless network.
Red:
indicates that the Wireless LAN PC Card is looking for an available access point.
Double-click the icon to open the Wireless LAN Utility. (Refer to the section on Configuring
the Wireless LAN PC Card.)
