NetComm NetComm Gateway Series, User Manual

Page: 38 / 62

ADSL2+ Modem Router User Guide YML14WN
38 www.netcomm.com.au
DDNS
Go to Access Management -> DDNS to setup your DDNS parameters. Dynamic DNS allows you to update your dynamic IP address with
one or many dynamic DNS services. So anyone can access your FTP or Web service on your computer using DNS-like address.
CWMP
The CWMP page is used to configure the TR-069 CPE. Here you may change the settings for the ACS’s parameters.
WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and
diagnostics to this router.
LABEL DESCRIPTION
CWMP: Activated/Deactivated TR-069 client on the CPE.
Login:
ACS
URL: URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter MUST be in the form of a valid HTTP or HTTPS
URL. An HTTPS URL indicates that the ACS supports SSL. The “host” portion of this URL is used by the CPE for validating the certificate from the ACS
when using certificate-based authentication.
User Name: Username used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This username is used only
for HTTP-based authentication of the CPE.
Password: Password used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This password is used only
for HTTP-based authentication of the CPE.
Connection Request
Path: The path of the device ConnectionRequestURL. The device ConnectionRequestURL should be configured based on the Device_IP,
Path and Port as follows:
http://Device_IP:Port/Path
Port: The port of the device ConnectionRequestURL
User Name: Username used to authenticate an ACS making a Connection Request to the CPE.
Password: Password used to authenticate an ACS making a Connection Request to the CPE.