Rev. 1 - YML674
www.netcomm.com.au
NB1300Plus4 ADSL Modem
Page 15
ADSL Modem - Ethernet
Step 2: Configuring the NB1300Plus4
After connecting all the ADSL Router cables you can either configure your NB1300Plus4 using
the Easy Config software provided (Refer to page 25) or complete the following manual
configuration instructions:
a.
Power on the ADSL Router and launch a web browser, such as Internet Explorer or
Netscape Navigator, browse to the address http://192.168.1.1.
b. Enter the correct user name and password to access the Configuration tool. The default user
name and password are as below.
User Name :
admin
Password :
password
Note:
You must click the
Submit
button on every page that you make changes on and
when you have made all your changes click the
Save Setting
and Reboot
button
from the bottom of the menu.
c.
Click on the
One Page Setup
link under the
Basic menu
.
You will need to Change your WAN and VC settings as provided by your ISP. The following
lists an example of the most common ISP settings used in Australia. The fields that require
changing from the default settings are highlighted.
