Rev. 1 - YML674
www.netcomm.com.au
NB1300Plus4 ADSL Modem
Page 13
ADSL Modem - Ethernet
ADSL Modem - Ethernet Configuration
Use this configuration if you:
■
Have been told to use the “ADSL Modem” Easy Config Profile, or
■
Want to connect this device to another router, or
■
Want to use your ISP’s software to log on to the Internet directly (not sharing) and your
computer will use a Public IP address, and
■
DO NOT need the NB1300Plus4 to share your Internet service ( You can still use windows
ICS to share your Internet Service), and
■
Do not require your computer to be protected (via NAT) from the Internet, e.g. you may be
running Personal firewall software or a Secondary router.
ADSL modem
(Transparent Bridge) - This is when you plug the modem directly into the
Ethernet port of a computer and then run Internet connection software (often supplied by your
ISP) on the computer to establish a connection to the Internet. This method means that the
computer connected to the Ethernet port of the NB1300Plus4 is exposed to the Internet and is
given a public IP address.
