www.netcomm.com.au YML830
Rev1
Page 4
CD2004 Mega-i 56K V.90 Modem User Guide
Step 1 - Hardware Installation
BEFORE YOU BEGIN:
This device should be fitted and installed under normal operation. Any damage caused by ab nor-
mal installation or operation is not included in the manu fac tur er’s warranty.
•
Connect the serial port on the back of the modem (marked RS-232) to a COM port on your Computer
using the serial cable.
•
Connect the power pack to a power point and connect the other end to the modem power socket
(marked POWER).
•
Connect the telephone cord to the line socket on the back of the modem (marked LINE) and the other
end to a phone socket.
•
Turn on your modem.
•
The hardware installation is complete. Turn on your computer and refer to the appropriate operating
system in Step 2 - Driver Installation to continue.
Caution/Warning
•
Avoid connecting your modem to a digital telephone line or PABX.
•
If you are using Windows XP or Windows 2000 and you intend on using your modem, please
ensure that the modem is turned on before turning on your PC so that the operating system
detects the modem on startup.
