NetComm 3G9WB, Administration Setup

Page: 3 / 3

Enabling Remote Administration
This guide will take you through the steps required to enable remote administration access to
your modem / router / VOIP ATA.
1. Open your web browser and go to the address http://10.0.0.138 , using admin as the
username and password.
2. Hover your mouse over the “ Advanced Settings ” menu at the top of the page, and
then move it to “ Access Control ”.
3. Click on “ Services ”.
4. Ensure the “ Enable ” checkbox is TICKED in the “ WAN ” section.
5. Click “ Save/Apply ” to save this change.
You should now be able to access your modem via the address: http://<your external IP
address>
You can find your IP address by going to http://www.whatip.com/ .