CS
TECHNOLOGIES
Defining the future of
Access Control
Head Quarters - Sydney NSW Australia
Sales: [email protected], Support: [email protected]
Tel. +61 2 9809 5176, Fax. +61 2 8878 0222
Sales: [email protected], Support: [email protected]
ABN: 13 108 508 676
Configuring Your Router
You will need the following hardware to set up your router.
•
NetComm Wireless Router
•
Laptop or PC
•
Activated Mini SIM Data card
•
4 Port LAN Switch (not needed at the site but will make configuration easier).
•
EVO Controller with TCP/IP adapter.
Before you power up the Cellular Router, please insert an active SIM card.
Now power up your
PC
,
NetComm Router
,
Switcher (HUB)
and
EVO controller
with TCP/IP
adapter in a similar configuration shown above.
The PC should be set to obtain an IP address automatically and will be given an IP address by the
NetComm router. By default the Lantronics XPort LAN adapter is set to auto DHCP so will also
receive an IP address from the NetComm Router.
Please note: Ensure you do not have any other Auto DHCP routers connected to this setup network.
