CS
TECHNOLOGIES
Defining the future of
Access Control
Head Quarters - Sydney NSW Australia
Sales: [email protected], Support: [email protected]
Tel. +61 2 9809 5176, Fax. +61 2 8878 0222
Sales: [email protected], Support: [email protected]
ABN: 13 108 508 676
Evolution – NetComm Wireless 3G Industrial M2M Router (NTC-6908)
This guide will hopefully explain how to configure your NetComm 3G router for remote connect to a
site with the Evolution System.
.
How it works?
The NetComm Wireless 3G Router is an internet modem that will have a public IP address. This
allows TCP/IP connections to be made to the site without the need of a phone line (ADSL) at the site.
This modem can be used for remote connection for the Access System as well as other services such
as CCTV.
What is required?
•
NetComm Wireless 3G Industrial M2M Router (NTC-6908 or equivalent)
•
Lantronix XPort LAN Module (to connect the NetComm Wireless to the EVO controller(s)).
•
Dynamic DNS service account
•
Mini SIM Data Card with encoded MICA codes (
see note below on MICA codes
)
Note: You do NOT want a ‘Micro’ or ‘Nano’ SIM cards. The larger ‘mini SIM is required.
