Netberg Demos R130 M2, Manual

Page: 147 / 263

Server Management Software
134
6.4. Front Panel User Interface
The BMC provides control panel interface functionality including indicators (Fault/status and Identi-
fy LEDs) and buttons (Power/ ID).
6.4.1. Power Button
The Power buttons allow to control the system status.
6.4.2. ID Button
The control panel Chassis Identify button toggles the state of the Chassis ID LED. If the ID LED
is off, then a button press will turn the LED on (blinking). If the LED is on, a button press or IPMI
Chassis Identify command will turn the LED off.
6.4.3. LEDs
The following table contains information on Status, ID and Heartbeat LED’s.
Table 6.1. Status LED, ID LED, and Heartbeat LED
LEDs Color Status Description
Blinking System Event (See following Status
LED table.)
Amber (Status
LED)
off Normal status
On Power On
Power/Status LED
Green (Power
LED controlled by
BIOS)
Off Power Off
off Normal status
Blinking Identify the system with interval
ID LED Blue
Solid ON Identify the system
Off BMC is not ready Heartbeat LED Green
Blinking BMC is ready
The following table contains information on Status LED when amber blinking.
Table 6.2. Status LED Activity
No. STATUS LED ACTIVITY DESCRIPTION
1 Temperature Sensor Non-critical / critical event asserted
2 Fan Sensors Non-critical / critical event asserted
3 Voltage Sensors State asserted
4 Power Supply State asserted
5 Processor Thermal trip
6 Event Logging Disable -SEL almost full