c. Enter the
security key-manager key query
command to see a detailed view of all keys stored
in the onboard key manager and verify that the
Restored
column =
yes/true
for all authentication
keys.
If the
Restored
column = anything other than
yes/true
, contact Customer Support.
d. Wait 10 minutes for the key to synchronize across the cluster.
13. Move the console cable to the partner node.
14. Give back the target node using the
storage failover giveback -fromnode local
command.
15. Check the giveback status, 3 minutes after it reports complete, using the
storage failover show
command.
If giveback is not complete after 20 minutes, contact Customer Support.
16. At the clustershell prompt, enter the
net int show -is-home false
command to list the logical
interfaces that are not on their home node and port.
If any interfaces are listed as
false
, revert those interfaces back to their home port using the
net int
revert
command.
17. Move the console cable to the target node and run the
version -v
command to check the ONTAP
versions.
18. Restore automatic giveback if you disabled it by using the
storage failover modify -node local
-auto-giveback true
command.
Restore NSE/NVE on systems running ONTAP 9.6 and later
Steps
1. Connect the console cable to the target node.
2. Use the
boot_ontap
command at the LOADER prompt to boot the node.
3. Check the console output:
If the console displays…
Then…
The login prompt
Go to Step 7.
Waiting for giveback…
a. Log into the partner node.
b. Confirm the target node is ready for giveback
with the
storage failover show
command.
4. Move the console cable to the partner node and give back the target node storage using the
storage
failover giveback -fromnode local -only-cfo-aggregates true local
command.
◦
If the command fails because of a failed disk, physically dis-engage the failed disk, but leave the disk in
the slot until a replacement is received.
◦
If the command fails because of an open CIFS sessions, check with customer how to close out CIFS
sessions.
32
