UX2000 SBC XO SIP Trunk Lync Server 2010 Configuration Guide
51
10.1.2
Current Alarms
The current alarms will also indicate problems. The alarms shown below posted as the XO SG went out of
service:
Figure 50 Alarm Status
10.2
Viewing Debug Logs
The UX2000 will continually record the last hour and 15 minutes of debug logs. These are split into 15
minute logs and can be viewed by clicking on the ‘Logs’ tab as shown below:
Figure 51 Debug Logs
The logs are ordered with the current log being written on top. When the current log reaches the end of
the recording period it will be rotated down from the top and a new log will start to write.
To view one of these logs click the blue box to the left of the file name. This will open a web based text
box that can be scrolled through to find certain debug information.
To download the log to either save or open in a text editor, click on the ‘Download’ link to the right of the
file information. This will open a dialog to either save to a file or open.
10.3
Sending Debug Logs to a Syslog Collector
To send debug information to a Syslog server, click ‘Settings/Logging Configuration/Remote Log Servers’.
Click on the green ‘+’ sign to add a Syslog collector. Complete the dialog with the following information:
Global Log Level: Set to the level required
Log Destination: Enter the FQDN or IP Address of the Syslog Collector
