UX2000 SBC XO SIP Trunk Lync Server 2010 Configuration Guide
20
Populate the following into the dialog:
Gateway FQDN or IP Address: For this config enter the FQDN of the UX2000 SBC since TLS is going
to be used between the Lync Server 2010 and the UX2000 SBC ‘ux.krisno.com’
Listening port for the IP/PSTN gateway: Enter ‘5067’
SIP Transport Protocol: Ensure the radio button for TLS is selected
Once the dialog is complete click ‘OK’.
Click on the ‘+’ sign next to the Mediation Pools to expand and the click on the configured Mediation
Server. Click on the ‘Edit Properties’ link in the right hand pane to open the edit dialog as shown below:
Figure 14 Edit Mediation Server Dialog
Click on the gateway FQDN ‘ux.krisno.com’ in the none associated gateway table. Once selected click the
‘Add’ button. This will move the move the ‘ux.krisno.com’ FQDN to the bottom table for associated
gateways. Click ‘OK’ to complete the dialog.
