Installation
Guide
Attach a 3 way connector (from master kit) to each corner
tube, make sure the push button on the connector locks
into the tubes hole. Each tube is secured to a connector by
a pushbutton fitting located on the connector. Attach a 4
way connector (from extender kit) in between each 3 way
connector. Finally insert the 5 way connector (from corner
extender kit) into the centre tube.
Attach a 3 way connector (from master kit)
to a corner tube, make sure the push button
on the connector locks into the tubes hole.
Each tube is secured to a connector by a
pushbutton fitting located on the connector.
(SEE FIG4)
Attach a 4 way connector (from extender kit)
onto the next post, make sure the push button
is once again locked into the tubes hole.
Repeat this step for the tube perpendicular to
this one.
(SEE FIG5)
Secure the 3 way & 4 way connectors with a
horizontal tube. Push the tube into the ends
of both connectors making sure the push
buttons lock into place.
(SEE FIG6)
FIG4
FIG5
FIG6
Fruit Cage Assembly
Starting at one corner, install the tubes into the ground
spikes socket. Slot the tube over the swaged end of the
ground spike and secure using push button. Check with
a spirit level that the upright are straight
(SEE FIG3).
FIG3
