210-0000027 rev03
Management System Configuration Defaults
IAM144-12 Circuit Defaults
Circuit Configuration
Circuit configurations for the IAM144-12 are defined in the Management User Guide for IP and
Mini DSLAMs. Default settings may be altered via the Circuit Configuration window of Net to
Net's Network Management System (NMS).
Data Storage
Configuration backup is inherent in the IAM144-12. Upon initial power up of the IP DSLAM, the
default parameters of the IAM144-12 will remain in place unless changed through NMS. Once
changed, new configurations will automatically be recorded in the Random Access Memory
(RAM) of the IAM144-12 and the Non-Volatile Random Access Memory (NVRAM) of the MUM.
While data stored in IAM144-12 RAM will be erased if the unit loses power, data stored within
MUM NVRAM will remain intact (even if the unit loses power) unless deliberately cleared or
reconfigured.
ADDITIONAL INFORMATION
Speed
There are two bandwidth options for the IDSL link: 128 kbps and 144 kbps. Default is 144 kbps.
Under optimal conditions, distance capabilities are 18,000 feet (5,486 meters) at either speed.
The units may not link up if the cable distance is greater than 18,000 feet - assuming the use of
26 American Wire Gauge (AWG) cable. Connections made with cable of a lesser gauge (e.g., 24
AWG) will link up at greater distances. Remote IDSL modems determine line speed through
their communication with the IAM144-12.
IP Addresses:
IPD12000 slot 13 192.168.254.252
IPD12000 slot 14 192.168.254.253
IPD4000 slot 5
192.168.254.252
Subnet Mask:
255.255.255.0
Default Gateway:
0.0.0.0
In-band Management: disabled
Uplink VLAN ID:
0
Circ. ID:
n/a
IP Range 1: 0.0.0.0 - 255.255.255.255
IP Range 2: 0.0.0.0 - 0.0.0.0
Speed:
144 kbps
Protocol:
ALL
Backbone-VLAN: 0
VLAN:
0 - 0
Pri [Priority]:
0
Flood:
Upl [Uplink]