Net Optics SpyderSwitch, Installation Manual

Page: 13 / 20

2xN 10/100 In-Line SpyderSwitch
Custom Mode
Click.on.the. Custom radio.button.if.you.would.like.to.program.a.custom.
monitoring.pattern.for.the.SpyderSwitch.to.scan.across.ports .
To.the.upper.right.of.the.Custom.Roaming.Mode.box.click.on.the.dotted.
square.icon ..This.will.prompt.you.to.enter.a.Span.Port.number,.and.the.num-
ber.of.minutes.you.want.to.spend.monitoring.this.port ..This.selection.will.be.
entered.into.the.Custom.Sequence.box .
Repeat.this.process.for.each.selection.you.would.like.to.add.to.the.sequence .
To.change.the.order.of.your.selections,.just.highlight.the.selection.and.use.the.
up.and.down.arrows.to.the.upper.right.of.the.Custom.Roaming.Mode.box .
To.delete.a.selection,.just.highlight.it.and.click.on.the. x .icon.to.the.upper.right.
of.the.Custom.Roaming.Mode.box .
Naming Ports
If.you.would.like.to.name.a.port,.go.to.the. View .Menu,.and.unselect.Button.
View ..The.Port.Naming.interface.on.the.next.page.will.appear ..
To.name.a.Port,.click.on.the. Rename Port .button.on.the.main.interface ..A.
window.will.appear.allowing.you.to.name.each.Port.connected.to.the.Spy-
derSwitch ..To.select.one.of.these.ports.to.monitor,.select.a.Port.from.the.drop.
down.menu.and.click.on.the. Set .button ..You.can.also.go.directly.to.the. Roam-
ing mode by clicking on the Roaming button (the port names you have chosen
will be reflected in the Roaming Interface).
You.can.return.to.the.Main.Interface.by.going.back.to.the.View.Menu.and.
selecting.Button.View .