Net Optics iTap Port Aggregator, Manual, Page: 33 / 55

iTap Dual Port Aggregator
Viewing System Status
You can view status information of the iTap and ports. System Status indicates if
the iTap is functioning correctly. If the System Status is DOWN, there is an inter-
nal error. For more information, contact Net Optics' Technical Support.
In addition to the System Status, you can view the status of each iTap port and
power supply as shown in Figure 17.
Figure 17: iTap System, Link, and Power Status
The following table explains the status fields.
Field Name Value Description
System Status UP/DOWN Down indicates an internal error. Call Net Optics
Customer Service for assistance
Port A Link Status UP/DOWN Indicates the state of incoming traffic on Port A
Port B Link Status UP/DOWN Indicates the state of incoming traffic on Port B
Port 1 Link Status UP/DOWN Indicates the state of communication on Port 1
Port Link Status UP/DOWN Indicates the state of communication on Port
Power Supply 1
Status ON/OFF Indicates if the iTap is receiving power from
Power Supply 1
Power Supply
Status ON/OFF Indicates if the iTap is receiving power from
Power Supply
If a link is down, check the Port Parameters in the configuration section and submit
correct settings if needed. If the link is still down, verify the communication
settings of the connected devices are correct and check the cables.