Net Optics iTap Port Aggregator, Manual, Page: 26 / 55

iTap Dual Port Aggregator
1
To connect the iTap to your network:
1. Connect Network Port A to the appropriate network device using the cables
supplied with your iTap.
2. Connect Network Port B to the appropriate network device using the cables
supplied with your iTap.
3. Verify that the iTap Network Ports are cabled in-line between two devices.
Connecting to the Monitoring Devices
Figure 13: ITP-PAD-SX-SFP Monitor Connections
®
www.netoptics.com
1
2
Dual Port Aggregator
GigaBit Fiber
TM
LINK
B
A
1
2
B
A
1 2
Monitor
OUT IN OUT IN OUT OUT
RESET
Network
A B
To Monitoring Device NIC (Rx)
To Monitoring Device NIC (Rx)