8
2xN 10/100/1000 Span Port iMatrix Switch
2. Change the password by typing the following command:
set password <password>
where
<password>
is your new password.
3. Record the username and password in a secure location.
To set the iMatrix Switch IP address:
1. Type
set ip <ip address>
where
<ip address>
is the IP address you are
assigning to the iMatrix Switch and press Enter
.
For example, typing
set ip 10.60.0.100 sets the iMatrix Switch IP address
to 10.60.0.100.
To display current settings:
1. Type
show set
and press
Enter
. The CLI displays the current setting simi-
lar to the example in Figure 7.
Figure 7:
Show Set Command Example
To disable the remote interfaces:
1. Type
show display
to view the current setting. The default value is
Display: ON.
2. Type
display
and press
Enter. Access to the iMatrix Switch from remote
interfaces will be blocked.
3. To restore the display and remote intefaces, type
display
and press
Enter
.
show set
IP Address:
10.50.0.100
Netmask:
255.0.0.0
Manager:
10.10.1.40
Gateway:
10.60.0.118
HW Version:
REV 1.00
SW Version:
REV 1.00
Port 1 Parameters: Gigabit
Port 2 Parameters: Gigabit