7
2xN 10/100/1000 Span Port iMatrix Switch
Figure 5:
Connecting to the CLI
3. Launch terminal emulation software and set the communication parameters
to:
19200 baud
8 data bits
No parity
1 stop bit
No flow control
4. Connect power to the iMatrix Switch. The CLI banner and login prompt
appears.
Figure 6:
Login and Password Prompts
5. At the login prompt, type
netoptics
and press
Enter
.
6. At the password prompt, type
netoptics
and press
Enter
. The
NetOp-
tics:
prompt appears.
To change the username and password:
1. Change the username by typing the following command:
set username <username>
where
<username>
is your new username.
*************************************
* Net Optics Command Line Interface *
*************************************
Login:
Password:
DB9 Control Port 2
To COM port on monitoring device or computer
CONTROL PORT 2
CONTROL PORT 1
OFF
1
3 4 5 6 7 8
2