![background image](http://html1.mh-extra.com/html/net-optics/ibypass-40g/ibypass-40g_quick-install-manual_1669595008.webp)
8
Step 2
Connect Power
Ensure the iBypass 40G Switch is grounded before connecting power. Do the
following to connect and apply power to the iBypass 40G Switch:
1. Plug one of the supplied power cords to a power connector located at the rear
of the chassis. Plug the other end to a power source. See Figure 4.
2. For redundancy, plug the other power cord to the iBypass 40G. Plug the other
end to a source independent from the first power source.
The
Power LEDs on the front illuminate.
Switch Default Settings
The iBypass 40G Switch ships with the following default system settings:
IP Address: 10.60.4.180
Threshold Port A: 80%
Netmask: 255.0.0.0
Threshold Port B: 80%
Gateway: 10.0.0.1
Username: admin
Password: netoptics