16
Assign IP in Web UI
If you want to change the IP address through the Web UI, do the following:
1. Open a browser on a PC connected to the iBypass switch or on the same
subnet, and enter the default IP address in the URL, https://10.60.4.180.
2. At the iBypass log in banner page, enter Username admin and Password
netoptics. The Home page displays. See Figure 7.
3. At the Home page, click on the Configuration tab. The Configuration page
displays. See Figure 8.
4. Select IP version, select Static or DHCP.
5. If you select Static, enter the IP address, netmask, and gateway.
6. Click the Apply button.
7. Click Reboot.
8. After the iBypass has rebooted, enter the new IP address at the URL.
9. Re-log in. The iBypass home page displays.
