6
3 SETUP
The web interface is made up of two main pages: the Live View page and the Setup
page. The Live View page interface was introduced in the previous section.
The Setup interface is primarily used for viewing and configuring the IP camera’s
settings.
From the Live View page, click the Setup link at the top right side:
Below is a screenshot of the Setup page. The initial page displayed is the “System
Information” page.
The left hand panel lists the configuration nodes which can be viewed and modified.
Clicking on an item will reveal sub menus which are available.
To return to the Live View page, click the Live View link in the right hand corner.
NOTE
: Configuration changes in the Setup interface require clicking the SAVE
button. Otherwise, changes will not be applied.
