Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
TG24/48 LIGHTING CONTROLLER PAGE: 4
2.2 Connect the power
Please check the supply power, ensure it in the suitable voltage range of the controller. The
plug must connect with the protective groundwire to ensure the safety.
2.3 Connect digital dimmer
z
There are two DMX512 XLR-D5F output sockets
on the rear panel of the Controller, Pin 1 for signal
ground, Pin 2 for negative, and Pin 3 for positive.
z
DMX512 cable is screened twist wire. Each end
of the cable should be joined to XLR plug by user.
Pin 1of XLR plug is connected to the screen net
of the cable. Two wires of twist (distinguished by
different colors) are connected to Pin 2 and Pin 3
of the plug respectively. Please do not confuse.
2.4 Audio signal source
z
The audio signal can select from sound mixing console and line level output of other
audio devices, or MIC selection. The controller can automatically pick the part of
low-frequency swing as the music trigger signal of Chase program.
z
One unbalanced monophonic audio input locates in the back board, the range of line
level input is: -10dB ~ +10db. When audio device is plug in, the audio source is line
level input. When there nothing plug in, the audio source is MIC selection.
Pin number
Cable conductor
1 Shield
2 Negative
pole
3 Positive
pole
4 Null
5 Null