Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
TG24/48 LIGHTING CONTROLLER PAGE: 10
current control.
z
Trigger mode of the current Chase. (The chase has 2 Trigger mode)
Auto:
The speed of chase is controlled by SPEED%
and CROSS%.
Music:
The chase running with music.
Press the
MODE
key continuously and the chase mode will be changed as
circulation.
z
The Auto mode of current chase:
SPEED%
and
CROSS%
1. This
SPEED%
fader is used to control the speed of current Chase, ranges from
0-100%, 0% most slowly and 100% fastest.
2. This
CROSS%
fader is used to control the fade of Chase-step, ranges from
0-100%, 0% most slowly and 100% fastest.
5 Initializtion of data
Steps:
1. Hold
down
PROGRAM
key and switch on the power till LCD screen displays
“=== PASSWORD ===”
2. Press
number keys 1, 2, 3, 12
at the same time.
3. The system will restart automatically after initializtion.
Special function
Notice:
Please keep this paper. If you forget the password, please contact with the retail store
to ask for help.
(A) The steps of using password to start:
1.
Hold down
PROGRAM
key
and switch on the power.
till LCD screen displays
“=== PASSWORD ===”
2. Press
number keys 1, 2, 11, 12
at the same time.
(B) The steps of canceling the starting password:
Repeat the above two steps.
z
When the password is enabled, every time when the controller is started the
password is needed:
Press number keys 1, 2, 11, 12 at the same time
.
