13
S25##3710A
PLACEMENT OF THE EMBER GLOW FIBERS (OPTIONAL)
A bag of platinum ember glow fibers is supplied is supplied with the ceramic burner kit. When heated, the
embers glow and flicker, similar to real glowing ash. The embers must be placed correctly in order to
function properly. The pack contains more embers than required. The remaining embers hould be kept for
further service requirements.
Platinum ember glow fibers are made from high-grade ceramic wool. The wool is similar to fiberglass and
should be handled carefully. We recommend the use of a suitable dust mask, gloves or tweezers when
handling the embers. Wash hands immediately after touching to avoid irritation. Store the fibers in a dry
place, away from any flammable liquids.
Before placing, tease out the fabric to form loose, irregular shapes using a tweezers.
The correct placement of the embers is extremely important, as the effect produced can only occur when
they are heated by the gas jets or by direct radiated heat. Do not force the embers into the burner holes, as
to not block them up.
By rubbing the embers into the faces of the logs which are heated by the gas jets, the fibers which adhere to
the logs will glow. With suitable gloves, gently rub a square of fibers into the areas of the logs which glow
when hot.
To left side of
burner jets
In front of
burner jets
To right side of
burner jets
Over burner jets
(do not force inside)
Tease out the fabric to
form loose, irregular
shapes. Do not
compress the embers.
