Page 6
The system will now be active and the display on the Tempera-
ture Controller will light up. After a few seconds it will “settle” to
display the temperature at the sensor inside the Bat Box, and to
indicate whether the heater is switched on.
The Target Temperature is factory set to 26.5ºC, although differ-
ent parts of the Bat Box are likely to be at different tempera-
tures, either above or below the temperature at the sensor.
You can use the system with the factory settings, or change
them as described below.
3.3
Display and Buttons on Temperature Controller
Indicator Lights
Buttons
Page 4
