Nestbox B1BBH User Manual Download Page 11

Page 11   

The  Nestbox  Company  Limited  is  not  able  to accept  any  responsi-
bility for any loss, damage, or loss of data suffered by any customer 
or third party as a result of  use, misuse or malfunction of the prod-
uct  or  this  User  Guide.    In  particular,  whilst  the  product  has  been 
extensively tested, we are unable to warrant that is free of defects. 
 
If you have a further technical or user question relating to the prod-
uct, please email it to us at [email protected]

 

6. 

Care for the Environment 

 

The  Nestbox  Company  cares  deeply  about  the  Environment.    We 
have adopted an Environmental Policy designed to demonstrate our 
commitment  to operating  our  business  in  harmony  with  the  natural 
and man made environments.  If you wish to see the full policy, it is 
available to read on our web site. 
 
Our  products  are  developed  to  be  economical  with  natural  re-
sources, both in manufacture and use.  We comply with all the rele-
vant laws and regulations, including those relating to the Restriction 
of  Hazardous  Substances  (known  as  RoHS)  and Waste Electronic 
and Electrical Equipment (WEEE).   
 

The wood used in our products comes from responsibly managed 
forests, as part of our commitment to the FSC.   
 

When you have finished using this product, please dis-
pose  of  it  responsibly.    We  would  suggest  using  your 
local  household  recycling  and  waste  treatment  facility.  
In  particular,  all  the  electrical  and  electronic  parts  of 
the product should be disposed of at a collection point 
for  electrical  and  electronic  equipment  or  returned  to 
us for disposal.   
 
 

 

7. 

Heater Extension Cable (A80) 

 

Available from our web site, this accessory extends the distance 
from Bat Box to Temperature Controller.  Please see our web site 
for details. 

 

 

Page 9 

Summary of Contents for B1BBH













Reviews: