GPS Personal Tracker User Manual V1.3
Page 5
To check the settings of authorized numbers
By sending an SMS which reads: “
password
+
G
” to the tracker you will receive a reply with all
the authorized numbers and settings in the unit.
Note: Commands are case sensitive therefore the letter “G” must be in capital.
By sending the following SMS: “
123456G
” to the unit. It will reply with: “Telephones: Axxxxx;
Bxxxxx; Cxxxxx; Dxxxxx; Exxxxx; F; G; H; Speed:080;0;0;0;0;0;1; BAT:100,30%”
The letters: A, B, C, D, E, are the entered preset numbers of the mobile phone. The letters: F; G; H;
are to be disregarded.
Speed: 080 signify the setting of the over-speed alarm which is 80km/h.
To recognize the meaning of: “0; 0; 0; 0; 0; 1”:
•
The number “0” implies that the function is turned off; whilst “1” indicates that the
function is turned on.
•
The first digit indicates the over speed alert.
•
The second digit refers to Continuous Tracking.
•
The “0; 0; 0” is to be disregarded
•
The sixth digit refers to the Low battery alarm.
The following: “100, 30%” indicates that the current battery is at 100% capacity, whilst the setting
of the low battery alarm is at 30%.
To locate the GPS trackers position if required anytime
Send an SMS: “
password
+
F
” to the unit, it will then reply with its position via SMS. Only the
authorized number will be able to receive a reply.
Note: Commands are case sensitive .Therefore the letter “F” must be in capital.
E.g. SMS:
“
123456F
”
to the unit. It will reply with its position.
