6
SIgNAL TyPe
ON/ALARM
ReLAy MODe
PULSe
ReLAy ACTION
On/Alarm signal:
Relay Pulses 2 sec
(When Inhibit input is
open or pulled high)
Off/Restore signal:
*Depends on the state
of the Inhibit Input, see
below
SWITCh SeTTINgS
Switch 2 on
To program the ReLAy OUTPUT to operate by ON/ALARM/OFF/ReSTORe signals.
Relay oUtPUt oPeRatIon
1
O
n
2
3
4
5
Program Mode
ON/ALARM Pulses relay
PANIC/TAMPR Pulses relay
AUX Pulses relay
LOW BATT Pulses relay
Operating Mode
ON/OFF/ALRM
Latches relay
PANIC/TAMPR Toggles relay
AUX Toggles relay
LOW BATT Latches relay
1
O
n
2
3
4
5
Program Mode
ON/ALARM Pulses relay
PANIC/TAMPR Pulses relay
AUX Pulses relay
LOW BATT Pulses relay
Operating Mode
ON/OFF/ALRM
Latches relay
PANIC/TAMPR Toggles relay
AUX Toggles relay
LOW BATT Latches relay
Alarm > Relay On
Restore > Relay Off
When using multiple radio
reed switches, the relay will
turn off when all reed switches
have closed
This mode is not recommended
for radio PIRs.
OPeRATION TABLe 1
OPeRATION TABLe 2
ON Button > Relay On
OFF Button > Relay Off
ON Button > No action
OFF Button > Relay Pulses 2 sec
This applies to radio
PIRs, radio reed
switches and radio
smoke detectors
Alarm > Relay pulses 2 sec
ON Button > Relay Pulses 2 sec
OFF Button > No action
SIgNAL TyPe
ON/OFF
ALARM/ReSTORe
ReLAy MODe
LATChINg
ReLAy ACTION
On/Alarm signal:
Latch On
Off/Restore signal:
Latch Off
SWITCh SeTTINgS
All off
OPeRATION
OPeRATION
Inhibit input is open or pulled
high.
OPeRATION
Inhibit input is pulled low.