Ness Radio Siren, Installation Notes

Page: 5 / 8

progrAmming
Programming of transmitters to the radio siren
is a simple two-step process.
1. eNter ProGraM MoDe
to enter program Mode, power-up the radio
Siren with the internal tamper unsealed. the
radio siren will then be in learn mode for 30
seconds or until programmed. Program Mode is
indicated by the LeD double flashing.
Once in program mode, resealing the tamper
will exit program mode immediately.
2. LearNING traNsMItters
send a Learn Message from the radio device/
transmitter that will operate the radio siren.
the siren will chirp twice + double-chirp to
acknowledge it has successfully learned the
transmitter’s code.
as soon as the radio device is programmed,
the radio siren will automatically exit program
mode.
mEssAgE typEs
the internal siren (and rss model external
siren output) can output different siren sounds
depending on the type of message received.
the Ness rst radio siren transmitter can send all
message types understood by the radio sirens.
tranSMitter MeSSage typeS
raDio Siren
action
RsT
TRAnsMiTTER
RK4
RAdio KEy
RK3
RAdio KEy
R15
RAdio PiR
R12
RAdio PiR
RsM
RAdio sMoKE
RR1/RR2
RAdio REEd
siREn on on AlARM AlARM AlARM AlARM siREn AlARM
oFF oFF oFF REsToRE REsToRE REsToRE REsToRE AlARM oFF
FiRE PAniC PAniC – TAMPER – TAMPER FiRE AlARM
sTRoBE on AUx
#
– – – – – sTRoBE on*
sTRoBE oFF – – – – – – sTRoBE oFF*
#
the rK4 aux button also resets siren. * rss satellite model only
other Ness transmitters may send a different set
of alarms, see the table below.
Normally only the RST Transmitter should
be programmed to the Radio Siren.
(Program other devices such as Radio PIRs or
Radio Keys for special purposes such as stand-
alone use.)
ProGraMMING aDDItIoNaL DeVICes
to program a second device, remove power from
the radio siren (mains and battery) then power-up
and repeat step 2 above.
up to 8 devices can be programmed.
Programming a 9th device will erase the 1st
device so that there are no more than 8 devices
programmed.
to erase DeVICes
to erase all devices, enter Program Mode and
press the oFF button of a radio Key 5 times.
(Must be a valid programmed radio key).
Ness radio transmitter s
HoW to seND a LearN MessaGe
radio Keys: Press and hold the Panic button for
at least 10 seconds.
Devices with removable batteries: Insert the
battery.
Make sure the Radio Siren is still in Program
Mode when you send it a Learn message.