Doc ID. 100-106 PROGRAM MANUAL.DOC
7
6.1 PROGRAM MODE
To enter PROGRAM mode, turn the Medi Alarm off by unplugging the mains plug and removing the 9 volt
battery.
Turn the Medi Alarm on by replacing the 9 volt battery. The Medi Alarm will display the version number for
0.5 seconds, followed by ‘1’, indicating that PENDANT 1 may be programmed.
Within 5 seconds of connecting the battery press the ‘CANCEL’ button on the Medi-Alarm to enter program
mode. The speaker will beep and the display will show ‘2’ on the display.
or
If a pendant is to be programmed as pendant 1, press any button 3 times on an unprogrammed pendant to
program. (The pendant must not have been previously programmed). The speaker will beep with each button
press and beep twice on the third button press and the status display will show ‘P’. Press the ‘CANCEL’ button
and the display will show ‘2’.
or
If the ‘HELP’ button on the Medi Alarm is pressed the speaker will beep once and the display will show the
status of Transmitter 1 (generally a pendant) where ‘-’ = unprogrammed and P = Programmed.
or
If no buttons are pressed within 5 seconds and Medi Alarm is programmed, the Medi Alarm will return to
operation mode.
6.2 PROGRAMMING RULES
Program options are displayed steady, the values for each option flash.
Press the ‘CANCEL’ button on the Medi-Alarm to step through the options.(1,2,3,4,5 etc.)
Press the ‘HELP’ button to view the programmed value for that option. The values will be displayed
flashing.
To step through values press the ‘HELP’ button.
To store a program change press the ‘HELP’ and ‘CANCEL’ buttons simultaneously on the Medi Alarm
unit.
Press the ‘CANCEL’ button to step to the next option.
Colour code (AS2999)
RED
help
YELLOW fault
GREEN
cancel
MAINS
BATTERY
FAULT
CANCEL
HELP
