Doc ID. 100-106 PROGRAM MANUAL.DOC
14
r
RESTORES ENABLED.
This option selects whether restore reports are sent to the central station if the alarm restores or the
‘CANCEL’ button is pressed. default = r
1) ‘r’ is on the display steady.
2) Press the ‘HELP’ button to view the programmed value (r = restore reports, - = no restores)
3) Press the ‘HELP’ button to select a value.
4) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store the selected value.
-
No restores sent by dialler.
r
Restores enabled
Press the ‘Cancel’ button to move to the next program option.
b BUTTON
OPERATION.
This option determines the manner in which the radio pendant buttons operate the system. (default H)
1) ‘b’ is on the display steady.
2) Press the ‘HELP’ button to view the programmed value (H = Help, C = Cancel, c = call)
3) Press the ‘HELP’ button to select a value.
4) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store the selected value.
H
All buttons generate a ‘HELP’ alarm.
C
Additional buttons generate a ‘CANCEL’ to restore ‘HELP’ alarms. (bottom button)
c
Buttons generate ‘CALL’, ‘HELP’ and ‘CANCEL’. Diagram below describes the button
operation for this option.
Press the ‘Cancel’ button to move to the next program option.
q
QUIET OPERATION: Determines if the internal beeper operates during alarm operation.
Default = 0
‘q’ is on the display
Press the ‘HELP’ button to view the programmed value
Programmed dial type will be flashed on status display. (0 or 1)
Press the ‘HELP’ button to step through the values. (0 or 1)
Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
program the value.
0 Beeps
activated
1 Quiet
operation
HELP
SIDE LEVER
CALL
CANCEL
