background image

8

DOCUMENT PART NUMBER 890-437
Revised September 2012

For products: 
106-170 Ness LUX Radio PIR Pet Aware 304MHz
106-172 Ness LUX Radio PIR Pet Aware 868MHz

© 2012 Ness Corporation Pty Ltd ABN 28 069 984 372
Specifications may change without notice.

www.nesscorporation.com

National Customer Service Centre
Ph: 1300 551 991

Ness Corporation manufacturing processes are accredited to ISO9001 quality standards and all possible care and diligence has 
been applied during manufacture to ensure the reliable operation of this product. However there are various external factors that 
may impede or restrict the operation of this product in accordance with the product’s specification.
These factors include, but are not limited to:
1. Erratic or reduced radio range. Ness radio products are sophisticated low power devices, however the presence of in-band 
radio signals, high power transmissions or interference caused by electrical appliances such as wireless routers, cordless 
phones, computers, TVs and other electronic devices may reduce the range performance. While such occurrences are unusual, 
they are possible. In this case it may be necessary to either increase the physical separation between the Ness receiver and other 
devices or if possible change the radio frequency or channel of the other devices.
2. Unauthorised tampering, physical damage, electrical interruptions such as mains failure, electrical spikes or lightning.

Dimensions

112(h) x 72(w) x 48(d) mm

Mounting height

2.1m – 2.4m

Coverage

Up to 15m x 15m @ 90°

Detector zones

20 dual element zones

Pulse count

Selectable 1–2 or 3–4

Range

Selectable High/Low. 15m max./12m max.

Pet Immunity

Single pet up to 18kg or multiple pets up to 10kg total

Sensor

Dual element pyroelectric

Alarm indication

Blue alarm LED

Night-Light

White LED with adjustable threshold, Dark/Dim Light

Alarm period

5 seconds

Warm up period

30 seconds

Operating voltage

3V DC

Battery

2 x CR123A Lithium

Quiescent current

< 14µA

Radio frequency

304MHz / 868MHz depending on region

Transmit power

100µW

Compatibility

Ness radio-enabled control panels, Ness MCR receiver, Ness SCR receiver

sPecIfIcatIons

Summary of Contents for Lux









Reviews: