User Manual
Ness IQ-MDVR-4 – Mobile Black Box Recorder.
18
While setting the DST, the start date must be earlier than the end date.
6.1.1 DATE/TIME
DATE FORMAT: Press
【
ENTER
】
to select different format MM/DD/YYYY, DD/MM/YYYY, or YYYY-MM-DD
TIME FORMAT: 12H or 24H, Press
【
ENTER
】
to select different formats.
TIME SYNC SOURCE: The system allows you to have the time synchronized via by either “GPS” or “NTP”.
A: If you select “GPS”, the IQ-MDVR must have GPS connected and GPS signal must be present. To
set the sync time in this menu, and unit will record the time difference-GMT offset, when the
system time signal arrives the sync time, unit will synchronize with GPS time.
B: While selecting the “NTP” (Network Time Protocol), the device must have network access
connection and assign the NTP IP location. This process runs at 6:30am local time while the
system has network connection;
TIME ZONE: Please choose the correct time zone where vehicle is.
SYNC TIME: This is the time when the unit will sync the system time every day. The method depends on the
setting on the TIME SYNC SOURCE option:
NTP SERVER IP: Input the IP server which supports NTP protocol, in order to allow the system have time
synchronization
through
the
network.
[Example:
"192.43.244.18",
"129.6.15.28",
"211.22.55.116", "194.88.2.60"]
DST: Daylight Saving Time. If this is set on, the following settings will be available for when DST will take effect.
DST MODE: There are two modes: Auto / Manual.
Auto: According to the international DST, i.e.: valid only between 2AM on Second Sun in March and
2AM on First Sun in NOV.
Scroll to
【
SAVE
】
to make the setting valid.