manualshive.com logo in svg

Ness AC-1000, User Manual

Share
Download
Ness AC-1000 User Manual Download Page 28

28

Ness AC1000 User Guide 

 

 

VIRDI AC 1000 User Guide                                                           

28

UNION COMMUNITY CO.,LTd.   

3Fl. Hyundai Topics Bldg, 44-3 Bangi-dong, Songpa-gu, Seoul, Korea 138-050,   

Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:[email protected], 

3.5.1.2. [1] Time Attendance control 

 

 Default time can be set to Start/Leave/Out/Back. After authentication, the 

terminal display mode can be automatically changed to programmed 

operation mode. If <multi-key authentication> is set as the operation mode, 

over 40 sub modes can be defined. 

 

< Start Time >   

00:00-00:00 

If time setting is not necessary,   

Set as ‘00:00-00:00’. 

 

To change the start time from ‘00:00~00:00’ to ‘06:00~09:59’, press [DEL] to 

delete the existing setting time, and enter [0][6][0][0][0][9][5][9] in sequence. 

 

 

As long as no other function button is pressed during the setting time, it 

operates in start time mode. Even if it is set to outside work, the terminal 

display mode automatically changes to start mode, so authentication is 

convenient.  

 

After setting <start time>, set <leave time> and <normal time> in the same 

manner. Each time shall not be overlapped.   

Ex) Start time:06:00~09:59, Leave time:17:00~22:00, Normal time:10:00~16:59 

< Start Time >   

06:00~09:59 

< Leave Time >   

17:00~22:00 

< Normal Time > 

10:00~16:59 

 

After setting normal time, press [ENT] to see the “Multi Fn-key” setting menu, 

which allows more than 5 working modes. 

 

< Multi Fn-key >   

1=F1:X  2=F2:X 

3=F3:X  4=F4:X 

Default setting: all ‘X’ 

 

This menu is useful when more than 5 working modes are necessary.     

- X setting: each function key represents a working mode such as F1=Start, 

F2=Leave, F3=Outside work and F4=Back. When a function key is pressed, 

authentication mode changes to the corresponding working mode.   

- O setting: a mode is defined by the combination of a function key and a 

number key such as “F3+1”.   

    (Ex.) If the setting is 1=F1: X    2=F2: X    3=F3: X    4=F4: O,   

14 different working modes can be defined according to user input 

such as [ENT]: normal, [F1]: start, [F2]: leave, [F3]: outside work and 

[F4]+‘0’~[F4]+‘9’. 

 

The O/X setting can be changed by pressing the corresponding number key. 

After setting is completed, press [ENT] to move to the upper menu. 

http://www.unioncomm.co.kr 

 

Summary of Contents for AC-1000

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands