9
PRogRammIng
STEP DESCRIPTION
ACTION
DISPLAY NOTE
E1
To enter program mode place
the link on the Program pins.
Program
Enrol Devices Menu
E2
Press and hold SELECT.
LONG PRESS
Flashing dash indicates that the
next empty slot is ready to enrol
a new device
E
3
Enrol a new device
tWR Radio key
: Press ARM & DISARM buttons together
other devices
: Insert the battery to send a learn signal
E4
The device has been enrolled
The display shows the slot
number of the new device.
E5
To enrol another device, press
SELECT twice to return to
PRESS
'n' is displayed
E6
Repeat from step E2
LONG PRESS
Flashing dash indicates that the
next empty slot is ready to enrol
a new device
E
enRollIng devICes
Program up to 20 TWR Radio Keys, Radio PIRs, Radio Reed Switches, Radio Smoke Detectors.
PRoduCt notes
106-267 tWR Reed switch operation with this receiver
The TWR Reed Switch has 2 x hardwired inputs as well as a reed switch onboard.
When used with the SCR-TWR receiver the reed switch will transmit either the reed switch alarm or
the hardwired inputs but not both.
• If you are using the hardwired inputs the magnet must be away from the device, therefore only the
hardwired inputs are active.
• If you are using the onboard reed switch, the hardwired inputs will be ignored.
