User Manual of Network Camera
26
Video Quality:
When bitrate type is selected as
Variable
, 6 levels of video quality are selectable.
Frame Rate:
Set the frame rate to 1/16~30 fps. The frame rate is to describe the frequency at
which the video stream is updated and it is measured by frames per second (fps).
A higher frame rate is advantageous when there is movement in the video stream,
as it maintains image quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.
Video Encoding:
If the
Stream Type
is set to main stream, H.264 is selectable, and if the stream
type is set to sub stream, H.264, and MJPEG are selectable.
The supported video encoding may differ according to the different platform.
I Frame Interval:
Set the I-Frame interval to 1~400.
4.
Click
Save
to save the settings.
5.4
Configuring Image Parameters
5.4.1
Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation,
hue, sharpness, etc.
The Display parameters vary depending on the camera model.
Steps:
1.
Enter the Display Settings interface:
Configuration > Advanced Configuration> Image> Display Settings
