User Manual of Network Camera
22
If you want to upload the captured pictures to FTP server, you have to enable the
continuous snapshot or event-triggered snapshot on
Snapshot
page.
.
5.2.6
Configuring UPnP™ Settings
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.
The UPnP protocol allows devices to connect seamlessly and to simplify the
implementation of networks at home and in corporate environments.
With the function enabled, you don’t need to configure the port mapping for each port,
and the camera is connected to the Wide Area Network via the router.
Steps:
1.
Enter the UPnP™ settings interface.
Configuration >Advanced Configuration >
Network > UPnP
2.
Check the checkbox to enable the UPnP™ function.
The name of the device when detected online can be edited.
Figure 5-10
Configure UPnP Settings
5.2.7
Configuring Email Settings
The system can be configured to send an Email notification to all designated receivers
if an alarm event is detected, e.g., motion detection event, video loss, video tampering,
etc.
Before you start:
Please configure the DNS Server settings under
Advanced Configuration >
Network > TCP/IP
before using the Email function.
