Nespresso aguila 220, User Manual

Page: 16 / 70

16
Statistics: User counter reset Language Setting Statistics: User product counter
Menu Settings
- Language Setting
- Statistics
• User product counter
• Products total
• Capsule counter
• User counter reset
Press Rinse button for 3
seconds
USER MENU
GENERAL SETTINGS
Select “GENERAL SETTINGS”
menu
Enter
GENERAL SETTINGS
Language = English
Select “Language” menu
Enter
Language = English
◄ English ►
Select desired language
Enter
Exit menu
Press Rinse button for 3
seconds
USER MENU
STATISTICS
Select “STATISTICS” menu
Enter
STATISTICS
User product counter
Select “User product coun-
ter”
Enter
User product counter
◄ Select a product ►
Espresso
4 2
Exit menu
or
Check “Products total” or
“Capsule counter user“
(read-only parameters).
Press Rinse button for 3
seconds
USER MENU
STATISTICS
Select “STATISTICS” menu
Enter
STATISTICS
User counter reset
Select “User counter reset”
Enter
User counter reset
◄ No ►
Select “Yes” or “No”
Enter
Exit menu
- Navigation
1
3 4 5
2
1
Up Next menu /
Increase value
2
Down Previous menu /
Decrease value
3
Default Load default value
4
Enter Edit/confirm
5
Escape Exit menu/cancel
Milk parameter: Milk foam set-
tings
Milk parameter: Refrigerator
settings
Cup heater Menu Settings
- Milk parameters
• Milk foam settings:
- Hot Foam
- Cold Foam
• Refrigerator settings
- Cup heater
Press Rinse button for 3
seconds
USER MENU
MILK PARAMETERS
Select “MILK PARAMETERS”
menu
Enter
MILK PARAMETERS
HOT FOAM = 0%
Select “HOT FOAM = 0%”
Enter
HOT FOAM = 0%
[ -10.0 .. ◄ 0 % ► .. 10.0]
Increase or decrease the
amount of air in the hot milk
foam if necessary. Range:
-10% to 10% of default.
Enter
MILK PARAMETERS
HOT FOAM = 3%
Repeat this procedure for
COLD FOAM if necessary.
Exit menu
Press Rinse button for 3
seconds
USER MENU
MILK PARAMETERS
Select “MILK PARAMETERS”
menu
Enter
MILK PARAMETERS
Refrigeration temperature = 40 °F
[5.0 °C]
Select
“Refrigeration temperature
= 40 °F [5.0 °C]”
Enter
Refrigeration temperature = 40 °F
[5.0 °C]
[ 4.0 .. ◄ 40 °F [5.0 °C] ► .. 8.0]
Increase or decrease the
refrigeration temperature as
needed or set to DEFAULT
(recommended).
Enter
Exit menu
Press Rinse button for 3
seconds
USER MENU
MACHINE PARAMETERS
Select “MACHINE PARAM-
ETERS” menu
Enter
MACHINE PARAMETERS
Cup heater = On
Select
“Cup heater = On”
Enter
Cup heater = On
◄ On ►
Select “On” or “Off”
Enter
Exit menu
Milk foam settings
To change the amount of milk
foam, simply change the % of
air in the milk foam as shown
on this page:
• -10%: Less foam
• 0%: Default
• +10%: More foam