Nesco NC-59101, Instruction Manual

Page: 22 / 26

OPERATING INSTRUCTIONS
-
-
Silverline Pressure Washers are fitted with an ‘Autostop’ feature which means
that the machine is only activated when the lance trigger is depressed, and
automatically deactivates the water flow when the trigger is released. This
saves water and power, and gives the user greater control of the product. In
‘Autostop’ mode, the water flow stops, but the pump continues to run. If you
intend to suspend the water flow for more than 3 minutes, switch the pressure
washer off. Prior to each time of use, it is necessary to ‘bleed’ the trapped air
within the lance.
It is recommended that positioning the lance at a 45 angle to the surface to
be cleaned will give you maximum control and the greatest cleaning efficiency.
When cleaning a vertical surface using detergent, start from the bottom and
work your way up, as this will minimise the risk of ‘streak’ lines on the surface,
When using detergent, test an inconspicuous area first to ensure that the
detergent will not adversely affect the surface to be cleaned. It is advisable
when using detergent to set the lance to the wide spray position.
21